Draft-Equipment | Brewing Supplies, Great Customer Service and More!

Have you had your fill of bottles? We can help you get into kegging!
Kegging is not limited to beers, but also seltzer, coffee, and wine.

DRAFT BASICS

Kegging is fast, easy and once you have a basic understanding of the process it greatly improve the shelf life and quality of your brews. Buying quality parts is going to be the first and most important step in getting started. The draft equipment we offer meets our high standard of quality and reliability.

Kegs

Kegs can come in two different flavors, Ball-Lock and Pin-Lock. Ball-Lock kegs are the most common type of keg. These kegs are still widely used in the industry and parts are everywhere. They are a great choice for getting started. Sizes will range from 2.5 gallon to 5 gallon options.

We offer new and used keg options at competitive pricing. We do recommend calling in advanced to check our keg inventory.

Pin-Lock kegs are still out there and used by many home brewers but have lost their appeal as parts become less common. You will often see these kegs in the second hand market for cheap. Be warned support is limited.

More details on kegs and their parts can be found here.

Parts and Accessories

We stock everything you need to build, customize and maintain your draft setup. We provide assistance even if you are not a home brewer. If you are dispensing a commercial keg we offer many different couplers and dispensing options.

Dispensing faucets by Perlick, Intertap and Krome in all different styles. These include forward sealing, standard, and nitro stout/coffee faucets.

Looking to upgrade your current setup? We can help you with that too, give us a call or come on down and we can discuss the options you have.

When it comes to dispensing there are so many options on both the home brew and the commercial. Make sure to check our dispensing how to guide here.

Never let your brews fall flat!

We do exchanges on Co2, Nitrogen and Blend Gas tanks.

Co2, Nitrogen and Blend Gas

If you are dispensing beer whether it is home brew or commercial then Co2 is you going to be the standard. Co2 can also be used in making your own seltzer water. We offer co2 tanks in 2.5lb, 5lb, 10lb and 20lb sizes.

Blend gases are a blend of 75%Nitrogen to 25% Co2. You might want this if you are dispensing Guinness or a home brewed stout.

Nitrogen is a must if you are dispensing coffee, wine or cocktails.

Blending gas and Nitrogen are high pressure gases that require regulators configured to handle those pressures.
If you are not sure please reach out to us.

TANK SWAPS

Run out of CO2 for your draft setup? No need to panic! We offer CO2 tank swaps for 2.5lb, 5lb, 10lb, and 20lb tanks and with our convenient hours we will never leave you hanging. We also supply blend gas and nitrogen swaps!

Please call ahead as inventory moves quickly!

CUSTOM DRAFT

Do you have a vision of your perfect draft setup? Let us help make your dream a reality. We have years of experience to help you build the perfect setup. We use industry standard parts with commercial quality.

Bring new life into an old kegerator or draft system that has been neglected for years. We can swap lines, update old or damaged hardware and we offer spare parts for just about any piece you might own. If we do not have it we will help you find it.

There are limitations to our expertise, we will decline repair work for any of the following.
Safety Concerns
Equipment Age
Risk of Equipment Damage
Non-Standard Manufacturer

DRAFT RENTALS

Need a draft solution immediately? We offer fully equipped jockey boxes ready for any event.
We have a selection of jockey boxes, CO2 tanks and keg couplers available to rent.